Whitenair offers a complete line of PCR UV systems, PCR UV Hoods use shortwave
ultraviolet to control unwanted transfers of nucleic acids. The systems bring together
UV irradiation, antimicrobial stainless steel and EPCGI to create a dual-attack
environment against PCR contaminations. Choose from cabinet or workstation
whereby the cabinet features a smaller work area than the workstation
1. 2 Built-in short wave 254nm UV Lamp for decontamination between experiments
2. Timer Sets UV exposure up to 12 hr
3. Safety Shut-off switch automatically turns the UV Light Off when door is opened
Product Details:
1. Key lock Prevents accidental exposure of samples to UV
2. Unique easy-Clean Stainless-Steel surfaces
3. Hinged door flip up for easy access to the work are
4. Built-in Power outlets for operation of equipment inside the work areas
5. Two shelves allow placement of small equipment
6. Polycarbonate panels block UV below 400nm
7. Choice of HEPA or Non-HEPA system configuration based on customer needs
8. HEPA model only: 3 layers of UV irradiation+ air Filtration / Circulation to ensure maximum decontamination,
carbon pre-filter with long life UV, HEPA Filter with standard UV Lamp and re-circulator with long life UV.
9. Quick and Easy filter and Lamp replacement as well as service.
Technical Data:
Specification
UV PCR Work station
UV HEPA PCR Workstation
Model No:WUVP 20
Model No:WUVP 20H
UV source(254 nm)
Inside the work area Air re-circulator at the Bottom
Pre-filter Chamber Inside the work area Air circulator at the bottom
UV safety
UV shut-off switches in all the chambers Red LED ambient Light to indicate UV on
White light
Overhead white LED Light brightly illuminates the work area